io.qt.core.QObject

All Implemented Interfaces:: QtObjectInterface, QtSignalBlockerInterface, QtSignalEmitterInterface, QtThreadAffineInterface

Direct Known Subclasses:: QAbstractAnimation, QAbstractAnimation, QAbstractAspect, QAbstractEventDispatcher, QAbstractItemDelegate, QAbstractItemModel, QAbstractItemModelTester, QAbstractNetworkCache, QAbstractOAuth, QAbstractOAuthReplyHandler, QAbstractTextDocumentLayout, QAccessibleBridgePlugin, QAccessiblePlugin, QAction, QActionGroup, QAnimationController, QAnimationDriver, QAnimationGroup, QAspectEngine, QButtonGroup, QClipboard, QCompleter, QCoreApplication, QDataWidgetMapper, QDBusAbstractAdaptor, QDBusAbstractInterfaceBase, QDBusPendingCallWatcher, QDBusServer, QDBusServiceWatcher, QDBusVirtualObject, QDesignerFormEditorInterface, QDesignerFormWindowToolInterface, QDesignerIntegrationInterface, QDesignerMetaDataBaseInterface, QDesignerWidgetDataBaseInterface, QDesignerWidgetFactoryInterface, QDnsLookup, QDrag, QDtls, QDtlsClientVerifier, QEventLoop, QExtensionManager, QFactoryLoader, QFileSelector, QFileSystemWatcher, QFutureWatcherBase, QGenericPlugin, QGesture, QGraphicsAnchor, QGraphicsApiFilter, QGraphicsEffect, QGraphicsItemAnimation, QGraphicsObject, QGraphicsScene, QGraphicsTransform, QHelpEngineCore, QHelpFilterEngine, QHelpSearchEngine, QHttpMultiPart, QIconEnginePlugin, QImageIOPlugin, QInputDevice, QInputMethod, QIODevice, QItemSelectionModel, QJSEngine, QLayout, QLibrary, QLocalServer, QMimeData, QMorphTarget, QMovie, QNetworkAccessManager, QNetworkCookieJar, QNode, QObjectCleanupHandler, QOffscreenSurface, QOpenGLContext, QOpenGLContextGroup, QOpenGLDebugLogger, QOpenGLShader, QOpenGLShaderProgram, QOpenGLVertexArrayObject, QPdfWriter, QPickEvent, QPluginLoader, QQmlAspectEngine, QQmlComponent, QQmlContext, QQmlEngineExtensionPlugin, QQmlExpression, QQmlExtensionPlugin, QQmlFileSelector, QQmlImageProviderBase, QQmlPropertyMap, QQuick3DObject, QQuickImageResponse, QQuickItem, QQuickItemGrabResult, QQuickRenderControl, QQuickTextDocument, QQuickTextureFactory, QQuickTransform, QRenderCapabilities, QRenderCaptureReply, QScreen, QScroller, QSessionManager, QSettings, QSGTexture, QSGTextureProvider, QSharedMemory, QShortcut, QSignalMapper, QSignalSpy, QSocketNotifier, QSqlDriver, QSqlDriverPlugin, QStencilOperationArguments, QStencilTestArguments, QStyle, QStyleHints, QStylePlugin, QSvgRenderer, QSyntaxHighlighter, QSystemTrayIcon, QTcpServer, QTestEventLoop, QTextDocument, QTextObject, QTextureWrapMode, QThread, QThreadPool, QTimeLine, QTimer, QTranslator, QUiLoader, QUndoGroup, QUndoStack, QValidator, QWidget, QWindow

public class QObject
extends QtObject
implements QtSignalEmitterInterface, QtSignalBlockerInterface, QtThreadAffineInterface

The base class of all Qt objects

Java wrapper for Qt class QObject

Nested Class Summary

Nested Classes
Modifier and Type	Class	Description
`class`	`QObject.MultiSignal`	Wrapper class supporting the definition of overloaded signal in a class.
`class`	`QObject.PrivateSignal0`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes no parameters.
`class`	`QObject.PrivateSignal1<A>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes one parameter.
`class`	`QObject.PrivateSignal2<A,B>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters.
`class`	`QObject.PrivateSignal3<A,B,C>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters.
`class`	`QObject.PrivateSignal4<A,B,C,D>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters.
`class`	`QObject.PrivateSignal5<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters.
`class`	`QObject.PrivateSignal6<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters.
`class`	`QObject.PrivateSignal7<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters.
`class`	`QObject.PrivateSignal8<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters.
`class`	`QObject.PrivateSignal9<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters.
`class`	`QObject.QBooleanProperty`	QBooleanProperty is primitive-typed version of QProperty<Boolean>.
`class`	`QObject.QByteProperty`	QByteProperty is primitive-typed version of QProperty<Byte>.
`class`	`QObject.QCharProperty`	QCharProperty is primitive-typed version of QProperty<Character>.
`class`	`QObject.QComputedBooleanProperty`	QComputedBooleanProperty is primitive-typed version of QComputedProperty<Boolean>.
`class`	`QObject.QComputedByteProperty`	QComputedByteProperty is primitive-typed version of QComputedProperty<Byte>.
`class`	`QObject.QComputedCharProperty`	QComputedCharProperty is primitive-typed version of QComputedProperty<Character>.
`class`	`QObject.QComputedDoubleProperty`	QComputedDoubleProperty is primitive-typed version of QComputedProperty<Double>.
`class`	`QObject.QComputedFloatProperty`	QComputedFloatProperty is primitive-typed version of QComputedProperty<Float>.
`class`	`QObject.QComputedIntProperty`	QComputedIntProperty is primitive-typed version of QComputedProperty<Integer>.
`class`	`QObject.QComputedLongProperty`	QComputedLongProperty is primitive-typed version of QComputedProperty<Long>.
`class`	`QObject.QComputedProperty<T>`	The `QComputedProperty` class is a template class for externally computed/stored values.
`class`	`QObject.QComputedShortProperty`	QComputedShortProperty is primitive-typed version of QComputedProperty<Short>.
`protected static class`	`QObject.QDeclarativeConstructor`	Parameter type for declarative constructors, i.e. constructors being called by QML only.
`class`	`QObject.QDoubleProperty`	QDoubleProperty is primitive-typed version of QProperty<Double>.
`class`	`QObject.QFloatProperty`	QFloatProperty is primitive-typed version of QProperty<Float>.
`class`	`QObject.QIntProperty`	QIntProperty is primitive-typed version of QProperty<Integer>.
`class`	`QObject.QLongProperty`	QLongProperty is primitive-typed version of QProperty<Long>.
`class`	`QObject.QProperty<T>`	The `QProperty` class enables automatic property bindings.
`class`	`QObject.QShortProperty`	QShortProperty is primitive-typed version of QProperty<Short>.
`class`	`QObject.Signal0`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes no parameters.
`class`	`QObject.Signal1<A>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes one parameter.
`class`	`QObject.Signal1Default1<A>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes one parameters and providing default value for the parameter.
`class`	`QObject.Signal2<A,B>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters.
`class`	`QObject.Signal2Default1<A,B>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters and providing a default value for parameter no. 2.
`class`	`QObject.Signal2Default2<A,B>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters and providing default values for parameters 1 and 2.
`class`	`QObject.Signal3<A,B,C>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters.
`class`	`QObject.Signal3Default1<A,B,C>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters and providing a default value for parameter no. 3.
`class`	`QObject.Signal3Default2<A,B,C>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters and providing default values for parameters 2 and 3.
`class`	`QObject.Signal3Default3<A,B,C>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters and providing default values for parameters 1 to 3.
`class`	`QObject.Signal4<A,B,C,D>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters.
`class`	`QObject.Signal4Default1<A,B,C,D>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing a default value for parameter no. 4.
`class`	`QObject.Signal4Default2<A,B,C,D>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing default values for parameters 3 and 4.
`class`	`QObject.Signal4Default3<A,B,C,D>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing default values for parameters 2 to 4.
`class`	`QObject.Signal4Default4<A,B,C,D>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing default values for parameters 1 to 4.
`class`	`QObject.Signal5<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters.
`class`	`QObject.Signal5Default1<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing a default value for parameter no. 5.
`class`	`QObject.Signal5Default2<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 4 and 5.
`class`	`QObject.Signal5Default3<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 3 to 5.
`class`	`QObject.Signal5Default4<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 2 to 5.
`class`	`QObject.Signal5Default5<A,B,C,D,E>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 1 to 5.
`class`	`QObject.Signal6<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters.
`class`	`QObject.Signal6Default1<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing a default value for parameter no. 6.
`class`	`QObject.Signal6Default2<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 5 and 6.
`class`	`QObject.Signal6Default3<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 4 to 6.
`class`	`QObject.Signal6Default4<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 3 to 6.
`class`	`QObject.Signal6Default5<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 2 to 6.
`class`	`QObject.Signal6Default6<A,B,C,D,E,F>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 1 to 6.
`class`	`QObject.Signal7<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters.
`class`	`QObject.Signal7Default1<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing a default value for parameter no. 7.
`class`	`QObject.Signal7Default2<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 6 and 7.
`class`	`QObject.Signal7Default3<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 5 to 7.
`class`	`QObject.Signal7Default4<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 4 to 7.
`class`	`QObject.Signal7Default5<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 3 to 7.
`class`	`QObject.Signal7Default6<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 2 to 7.
`class`	`QObject.Signal7Default7<A,B,C,D,E,F,G>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 1 to 7.
`class`	`QObject.Signal8<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters.
`class`	`QObject.Signal8Default1<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing a default value for parameter no. 8.
`class`	`QObject.Signal8Default2<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 7 and 8.
`class`	`QObject.Signal8Default3<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 6 to 8.
`class`	`QObject.Signal8Default4<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 5 to 8.
`class`	`QObject.Signal8Default5<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 4 to 8.
`class`	`QObject.Signal8Default6<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 3 to 8.
`class`	`QObject.Signal8Default7<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 2 to 8.
`class`	`QObject.Signal8Default8<A,B,C,D,E,F,G,H>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 1 to 8.
`class`	`QObject.Signal9<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters.
`class`	`QObject.Signal9Default1<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing a default value for parameter no. 9.
`class`	`QObject.Signal9Default2<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 8 and 9.
`class`	`QObject.Signal9Default3<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 7 to 9.
`class`	`QObject.Signal9Default4<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 6 to 9.
`class`	`QObject.Signal9Default5<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 5 to 9.
`class`	`QObject.Signal9Default6<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 4 to 9.
`class`	`QObject.Signal9Default7<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 3 to 9.
`class`	`QObject.Signal9Default8<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 2 to 9.
`class`	`QObject.Signal9Default9<A,B,C,D,E,F,G,H,I>`	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 1 to 9.
`protected static class`	`QObject.SignalConfiguration`	Container type for `QObject.MultiSignal` initialization.

Nested classes/interfaces inherited from class io.qt.QtObject

QtObject.QPrivateConstructor

Field Summary

Fields
Modifier and Type	Field	Description
`QObject.Signal1Default1<QObject>`	`destroyed`	See QObject::destroyed(QObject * arg__1)
`QObject.PrivateSignal1<String>`	`objectNameChanged`	See QObject::objectNameChanged(const QString & objectName)
`static QMetaObject`	`staticMetaObject`	This variable stores the meta-object for the class.

Constructor Summary

Constructors
Modifier	Constructor	Description
	`QObject()`	Overloaded constructor for `QObject(io.qt.core.QObject)` with `parent = null`.
	`QObject(QObject parent)`	See QObject::QObject(QObject*)
`protected`	`QObject(QObject.QDeclarativeConstructor constructor)`	Constructor for internal use only.
`protected`	`QObject(QtObject.QPrivateConstructor p)`	Constructor for internal use only.

Method Summary

Modifier and Type	Method	Description
`boolean`	`blockSignals(boolean b)`	See QObject::blockSignals(bool)
`protected void`	`childEvent(QChildEvent event)`	See QObject::childEvent(QChildEvent*)
`QList<QObject>`	`children()`	See QObject::children()const
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal1<?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal2<?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal2<A,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F, G> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F, G> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F, G, H> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F, G> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F, G, H> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static <A, B, C, D, E, F, G, H, I> QMetaObject.Connection`	`connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Slot9<A,B,C,D,E,F,G,H,I> slot, Qt.ConnectionType... connectionType)`	Initializes a connection between the given signal and slot.
`static QMetaObject.Connection`	`connect(QObject sender, QMetaMethod signal, QObject receiver, QMetaMethod slot, Qt.ConnectionType... connectionType)`	Creates a connection of the given `type` from the `signal` in the `sender` object to the `method` in the `receiver` object.
`static QMetaObject.Connection`	`connect(QObject sender, String signal, QObject receiver, String slot, Qt.ConnectionType... connectionType)`	Creates a connection of the given type from the signal in the sender object to the method in the receiver object.
`protected void`	`connectNotify(QMetaMethod signal)`	See QObject::connectNotify(QMetaMethod)
`protected void`	`customEvent(QEvent event)`	See QObject::customEvent(QEvent*)
`boolean`	`disconnect()`	Disconnect all connections originating in this object.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal1<?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal2<?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal2<A,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Slot4<A,B,C,D> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal, QMetaObject.Slot4<A,B,C,D> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Slot5<A,B,C,D,E> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F, G> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F, G> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F, G, H> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)`	Removes the connection between the given signal and slot.
`static <A> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)`	Removes the connection between the given signal and slot.
`static <A, B> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F, G> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F, G, H> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot)`	Removes the connection between the given signal and slot.
`static <A, B, C, D, E, F, G, H, I> boolean`	`disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Slot9<A,B,C,D,E,F,G,H,I> slot)`	Removes the connection between the given signal and slot.
`static boolean`	`disconnect(QMetaObject.Connection connection)`	Disconnect a connection.
`static boolean`	`disconnect(QObject sender, QMetaMethod signal, QObject receiver, QMetaMethod slot)`	Disconnects signal in object sender from method in object receiver receiver.
`static boolean`	`disconnect(QObject sender, String signal, QObject receiver, String slot)`	Disconnects signal in object sender from method in object receiver.
`boolean`	`disconnect(Object receiver)`	Disconnect all connections made from this signal emitter to a specific object.
`protected void`	`disconnectNotify(QMetaMethod signal)`	See QObject::disconnectNotify(QMetaMethod)
`void`	`disposeLater()`	See QObject::deleteLater()
`void`	`dumpObjectInfo()`	See QObject::dumpObjectInfo()const
`void`	`dumpObjectTree()`	See QObject::dumpObjectTree()const
`QList<QByteArray>`	`dynamicPropertyNames()`	See QObject::dynamicPropertyNames()const
`protected static void`	`emit(QObject.PrivateSignal0 signal)`	Emits a private signal.
`protected static <A> void`	`emit(QObject.PrivateSignal1<A> signal, A arg1)`	Emits a private signal.
`protected static <A, B> void`	`emit(QObject.PrivateSignal2<A,B> signal, A arg1, B arg2)`	Emits a private signal.
`protected static <A, B, C> void`	`emit(QObject.PrivateSignal3<A,B,C> signal, A arg1, B arg2, C arg3)`	Emits a private signal.
`protected static <A, B, C, D> void`	`emit(QObject.PrivateSignal4<A,B,C,D> signal, A arg1, B arg2, C arg3, D arg4)`	Emits a private signal.
`protected static <A, B, C, D, E> void`	`emit(QObject.PrivateSignal5<A,B,C,D,E> signal, A arg1, B arg2, C arg3, D arg4, E arg5)`	Emits a private signal.
`protected static <A, B, C, D, E, F> void`	`emit(QObject.PrivateSignal6<A,B,C,D,E,F> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6)`	Emits a private signal.
`protected static <A, B, C, D, E, F, G> void`	`emit(QObject.PrivateSignal7<A,B,C,D,E,F,G> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7)`	Emits a private signal.
`protected static <A, B, C, D, E, F, G, H> void`	`emit(QObject.PrivateSignal8<A,B,C,D,E,F,G,H> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7, H arg8)`	Emits a private signal.
`protected static <A, B, C, D, E, F, G, H, I> void`	`emit(QObject.PrivateSignal9<A,B,C,D,E,F,G,H,I> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7, H arg8, I arg9)`	Emits a private signal.
`boolean`	`event(QEvent event)`	See QObject::event(QEvent*)
`boolean`	`eventFilter(QObject watched, QEvent event)`	See QObject::eventFilter(QObject,QEvent)
`QObject`	`findChild()`	Overloaded function for `findChild(Class)` with `cl = QObject.class`.
`<T extends QObject> T`	`findChild(Class<T> cl)`	Overloaded function for `findChild(Class,String,Qt.FindChildOptions)`
`<T extends QObject> T`	`findChild(Class<T> cl, String name)`	Overloaded function for `findChild(Class,String,Qt.FindChildOptions)` with: `options = FindChildrenRecursively`.
`<T extends QObject> T`	`findChild(Class<T> cl, String name, Qt.FindChildOption... options)`	Overloaded function for `findChild(Class,String,Qt.FindChildOptions)`.
`<T extends QObject> T`	`findChild(Class<T> cl, String name, Qt.FindChildOptions options)`	Returns the child of this object that instane of cl and that is called name, or `null` if there is no such object.
`QList<QObject>`	`findChildren()`	Overloaded function for `findChildren(Class)` with `cl = QObject.class`.
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl)`	Overloaded function for `findChildren(Class,String,Qt.FindChildOptions)`
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl, QRegularExpression re)`	Overloaded function for `findChildren(Class,QRegularExpression,Qt.FindChildOptions)` with: `options = FindChildrenRecursively`.
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl, QRegularExpression re, Qt.FindChildOption... options)`	Overloaded function for `findChildren(Class,QRegularExpression,Qt.FindChildOptions)`.
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl, QRegularExpression re, Qt.FindChildOptions options)`	This function overloads `findChildren()`.
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl, String name)`	Overloaded function for `findChildren(Class,String,Qt.FindChildOptions)` with: `options = FindChildrenRecursively`.
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl, String name, Qt.FindChildOption... options)`	Overloaded function for `findChildren(Class,String,Qt.FindChildOptions)`.
`<T extends QObject> QList<T>`	`findChildren(Class<T> cl, String name, Qt.FindChildOptions options)`	Returns all children of this object with the given name that are instance of cl, or an empty list if there are no such objects.
`boolean`	`inherits(Class<?> targetType)`	Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.
`boolean`	`inherits(String classname)`	See QObject::inherits(const char*)const
`void`	`installEventFilter(QObject filterObj)`	See QObject::installEventFilter(QObject*)
`protected boolean`	`isSignalConnected(QMetaMethod signal)`	See QObject::isSignalConnected(QMetaMethod)const
`boolean`	`isWidgetType()`	See QObject::isWidgetType()const
`boolean`	`isWindowType()`	See QObject::isWindowType()const
`void`	`killTimer(int id)`	See QObject::killTimer(int)
`QMetaObject`	`metaObject()`	Returns a pointer to the meta-object of this object.
`void`	`moveToThread(QThread thread)`	See QObject::moveToThread(QThread*)
`String`	`objectName()`	See QObject::objectName()const
`QObject`	`parent()`	See QObject::parent()const
`Object`	`property(String name)`	See QObject::property(const char*)const
`<T extends QtObjectInterface> T`	`qt_metacast(Class<T> targetType)`	Casts an object to the given targetType.
`protected int`	`receivers(QMetaObject.AbstractSignal signalObject)`
`protected int`	`receivers(String signal)`	See QObject::receivers(const char*)const
`void`	`removeEventFilter(QObject obj)`	See QObject::removeEventFilter(QObject*)
`protected QObject`	`sender()`	See QObject::sender()const
`protected int`	`senderSignalIndex()`	See QObject::senderSignalIndex()const
`void`	`setObjectName(String name)`	See QObject::setObjectName(QString)
`void`	`setParent(QObject parent)`	See QObject::setParent(QObject*)
`boolean`	`setProperty(String name, Object value)`	See QObject::setProperty(const char*,QVariant)
`boolean`	`signalsBlocked()`	See QObject::signalsBlocked()const
`int`	`startTimer(int interval)`	Overloaded function for `startTimer(int, io.qt.core.Qt.TimerType)` with `timerType = io.qt.core.Qt.TimerType.CoarseTimer`.
`int`	`startTimer(int interval, Qt.TimerType timerType)`	See QObject::startTimer(int,Qt::TimerType)
`QThread`	`thread()`	See QObject::thread()const
`protected void`	`timerEvent(QTimerEvent event)`	See QObject::timerEvent(QTimerEvent*)
`String`	`toString()`
`static String`	`tr(String source)`	Returns a translated version of source, or source itself if there is no appropriate translated version.
`static String`	`tr(String source, String comment)`	Returns a translated version of source, or source itself if there is no appropriate translated version.
`static String`	`tr(String source, String comment, int count)`	Returns a translated version of source, or source itself if there is no appropriate translated version.

Methods inherited from class io.qt.QtObject

dispose, equals, isDisposed

Methods inherited from class java.lang.Object

clone, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface io.qt.QtObjectInterface

dispose, isDisposed

Field Details
- staticMetaObject
  
  public static final QMetaObject staticMetaObject
  
  This variable stores the meta-object for the class.
- destroyed
  
  public final QObject.Signal1Default1<QObject> destroyed
  
  See QObject::destroyed(QObject * arg__1)
- objectNameChanged
  
  public final QObject.PrivateSignal1<String> objectNameChanged
  
  See QObject::objectNameChanged(const QString & objectName)
Constructor Details
- QObject
  
  public QObject()
  
  Overloaded constructor for QObject(io.qt.core.QObject) with parent = null.
- QObject
  
  public QObject(QObject parent)
  
  See QObject::QObject(QObject*)
- QObject
  
  protected QObject(QtObject.QPrivateConstructor p)
  
  Constructor for internal use only.
  
  Parameters:
  
  p - expected to be null.
- QObject
  
  protected QObject(QObject.QDeclarativeConstructor constructor)
  
  Constructor for internal use only. It is not allowed to call the declarative constructor from inside Java.
Method Details
- blockSignals
  
  @QtUninvokable public final boolean blockSignals(boolean b)
  
  See QObject::blockSignals(bool)
- children
  
  @QtUninvokable public final QList<QObject> children()
  
  See QObject::children()const
- disposeLater
  
  public final void disposeLater()
  
  See QObject::deleteLater()
- dumpObjectInfo
  
  @QtUninvokable public final void dumpObjectInfo()
  
  See QObject::dumpObjectInfo()const
- dumpObjectTree
  
  @QtUninvokable public final void dumpObjectTree()
  
  See QObject::dumpObjectTree()const
- dynamicPropertyNames
  
  @QtUninvokable public final QList<QByteArray> dynamicPropertyNames()
  
  See QObject::dynamicPropertyNames()const
- inherits
  
  @QtUninvokable public final boolean inherits(String classname)
  
  See QObject::inherits(const char*)const
- installEventFilter
  
  @QtUninvokable public final void installEventFilter(QObject filterObj)
  
  See QObject::installEventFilter(QObject*)
- isSignalConnected
  
  @QtUninvokable protected final boolean isSignalConnected(QMetaMethod signal)
  
  See QObject::isSignalConnected(QMetaMethod)const
- isWidgetType
  
  @QtUninvokable public final boolean isWidgetType()
  
  See QObject::isWidgetType()const
- isWindowType
  
  @QtUninvokable public final boolean isWindowType()
  
  See QObject::isWindowType()const
- killTimer
  
  @QtUninvokable public final void killTimer(int id)
  
  See QObject::killTimer(int)
- moveToThread
  
  @QtUninvokable public final void moveToThread(QThread thread)
  
  See QObject::moveToThread(QThread*)
- objectName
  
  @QtUninvokable public final String objectName()
  
  See QObject::objectName()const
- parent
  
  @QtUninvokable public final QObject parent()
  
  See QObject::parent()const
- property
  
  @QtUninvokable public final Object property(String name)
  
  See QObject::property(const char*)const
- receivers
  
  @QtUninvokable protected final int receivers(String signal)
  
  See QObject::receivers(const char*)const
- removeEventFilter
  
  @QtUninvokable public final void removeEventFilter(QObject obj)
  
  See QObject::removeEventFilter(QObject*)
- sender
  
  @QtUninvokable protected final QObject sender()
  
  See QObject::sender()const
- senderSignalIndex
  
  @QtUninvokable protected final int senderSignalIndex()
  
  See QObject::senderSignalIndex()const
- setObjectName
  
  @QtUninvokable public final void setObjectName(String name)
  
  See QObject::setObjectName(QString)
- setParent
  
  @QtUninvokable public final void setParent(QObject parent)
  
  See QObject::setParent(QObject*)
- setProperty
  
  @QtUninvokable public final boolean setProperty(String name, Object value)
  
  See QObject::setProperty(const char*,QVariant)
- signalsBlocked
  
  @QtUninvokable public final boolean signalsBlocked()
  
  See QObject::signalsBlocked()const
  
  Specified by:
  
  signalsBlocked in interface QtSignalBlockerInterface
- startTimer
  
  @QtUninvokable public final int startTimer(int interval)
  
  Overloaded function for startTimer(int, io.qt.core.Qt.TimerType) with timerType = io.qt.core.Qt.TimerType.CoarseTimer.
- startTimer
  
  @QtUninvokable public final int startTimer(int interval, Qt.TimerType timerType)
  
  See QObject::startTimer(int,Qt::TimerType)
- thread
  
  @QtUninvokable public final QThread thread()
  
  See QObject::thread()const
  
  Specified by:
  
  thread in interface QtThreadAffineInterface
- childEvent
  
  @QtUninvokable protected void childEvent(QChildEvent event)
  
  See QObject::childEvent(QChildEvent*)
- connectNotify
  
  @QtUninvokable protected void connectNotify(QMetaMethod signal)
  
  See QObject::connectNotify(QMetaMethod)
- customEvent
  
  @QtUninvokable protected void customEvent(QEvent event)
  
  See QObject::customEvent(QEvent*)
- disconnectNotify
  
  @QtUninvokable protected void disconnectNotify(QMetaMethod signal)
  
  See QObject::disconnectNotify(QMetaMethod)
- event
  
  @QtUninvokable public boolean event(QEvent event)
  
  See QObject::event(QEvent*)
- eventFilter
  
  @QtUninvokable public boolean eventFilter(QObject watched, QEvent event)
  
  See QObject::eventFilter(QObject*,QEvent*)
- timerEvent
  
  @QtUninvokable protected void timerEvent(QTimerEvent event)
  
  See QObject::timerEvent(QTimerEvent*)
- tr
  
  public static String tr(String source)
  
  Returns a translated version of source, or source itself if there is no appropriate translated version. Note that if you need to translate in a static context, you can use QCoreApplication::translate(), which is a static method.
  
  Parameters:
  
  source - the source text to translate.
  
  Returns:
  
  translated version of the source text.
- tr
  
  public static String tr(String source, String comment)
  
  Returns a translated version of source, or source itself if there is no appropriate translated version. The comment is used to help translators translate the source text. Note that if you need to translate in a static context, you can use QCoreApplication::translate(), which is a static method.
  
  Parameters:
  
  source - the source text to translate.
  
  comment - helps the translator translate the source text.
  
  Returns:
  
  translated version of the source text.
- tr
  
  public static String tr(String source, String comment, int count)
  
  Returns a translated version of source, or source itself if there is no appropriate translated version. If %n occurs in the source text, it will be substituted with count. The comment is used to help translators translate the source text. Note that if you need to translate in a static context, you can use QCoreApplication::translate(), which is a static method.
  
  Parameters:
  
  source - the source text to translate.
  
  comment - helps the translator translate the source text.
  
  count - in source %n will be substituted by count.
  
  Returns:
  
  translated version of the source text.
- findChild
  
  @QtUninvokable public final QObject findChild()
  
  Overloaded function for findChild(Class) with cl = QObject.class.
  
  Returns:
  
  found child
- findChild
  
  @QtUninvokable public final <T extends QObject> T findChild(Class<T> cl)
  Overloaded function for findChild(Class,String,Qt.FindChildOptions)
  
  with:
  
  name = null
  
  options = FindChildrenRecursively
  Type Parameters:
  
  T - type of child
  
  Parameters:
  
  cl - type of child
  
  Returns:
  
  found child
- findChild
  
  @QtUninvokable public final <T extends QObject> T findChild(Class<T> cl, String name)
  
  Overloaded function for findChild(Class,String,Qt.FindChildOptions) with: options = FindChildrenRecursively.
  
  Type Parameters:
  
  T - type of child
  
  Parameters:
  
  cl - type of child
  
  name - name of child
  
  Returns:
  
  found child
- findChild
  
  @QtUninvokable public final <T extends QObject> T findChild(Class<T> cl, String name, Qt.FindChildOption... options)
  
  Overloaded function for findChild(Class,String,Qt.FindChildOptions).
  
  Type Parameters:
  
  T - type of child
  
  Parameters:
  
  cl - type of child
  
  name - name of child
  
  options - search options
  
  Returns:
  
  found child
- findChild
  
  @QtUninvokable public final <T extends QObject> T findChild(Class<T> cl, String name, Qt.FindChildOptions options)
  
  Returns the child of this object that instane of cl and that is called name, or null if there is no such object. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.
  
  If there is more than one child matching the search, the most direct ancestor is returned. If there are several direct ancestors, it is undefined which one will be returned. In that case, findChildren() should be used.
  
  This example returns a child QPushButton of parentWidget named "button1", even if the button isn't a direct child of the parent:
  
  QPushButton button = parentWidget.findChild(QPushButton.class, "button1");
  
  This example returns a QListWidget child of parentWidget:
  
  QListWidget list = parentWidget.findChild(QListWidget.class);
  
  This example returns a child QPushButton of parentWidget (its direct parent) named "button1":
  
  QPushButton button = parentWidget.findChild(QPushButton.class, "button1", Qt.FindChildOption.FindDirectChildrenOnly);
  
  This example returns a QListWidget child of parentWidget, its direct parent:
  
  QListWidget list = parentWidget.findChild(QListWidget.class, null, Qt.FindChildOption.FindDirectChildrenOnly);
  
  Type Parameters:
  
  T - type of child
  
  Parameters:
  
  cl - type of child
  
  name - name of child
  
  options - search options
  
  Returns:
  
  found child
  
  See Also:
  
  findChildren()
- findChildren
  
  @QtUninvokable public final QList<QObject> findChildren()
  
  Overloaded function for findChildren(Class) with cl = QObject.class.
  
  Returns:
  
  found children
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl)
  Overloaded function for findChildren(Class,String,Qt.FindChildOptions)
  
  with:
  
  name = null
  
  options = FindChildrenRecursively
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  Returns:
  
  found children
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl, String name)
  
  Overloaded function for findChildren(Class,String,Qt.FindChildOptions) with: options = FindChildrenRecursively.
  
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  name - name of children
  
  Returns:
  
  found children
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl, String name, Qt.FindChildOption... options)
  
  Overloaded function for findChildren(Class,String,Qt.FindChildOptions).
  
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  name - name of children
  
  options - search options
  
  Returns:
  
  found children
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl, String name, Qt.FindChildOptions options)
  
  Returns all children of this object with the given name that are instance of cl, or an empty list if there are no such objects. Omitting the name argument causes all object names to be matched. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.
  
  The following example shows how to find a list of child QWidgets of the specified parentWidget named widgetname:
  
  List<QWidget> widgets = parentWidget.findChildren(QWidget.class, "widgetname");
  
  This example returns all QPushButtons that are children of parentWidget:
  
  List<QPushButton> allPButtons = parentWidget.findChildren(QPushButton.class);
  
  This example returns all QPushButtons that are immediate children of parentWidget:
  
  List<QPushButton> childButtons = parentWidget.findChildren(QPushButton.class, null, Qt.FindChildOption.FindDirectChildrenOnly);
  
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  name - name of children
  
  options - search options
  
  Returns:
  
  found children
  
  See Also:
  
  findChild()
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl, QRegularExpression re)
  
  Overloaded function for findChildren(Class,QRegularExpression,Qt.FindChildOptions) with: options = FindChildrenRecursively.
  
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  re - regular expression
  
  Returns:
  
  found children
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl, QRegularExpression re, Qt.FindChildOption... options)
  
  Overloaded function for findChildren(Class,QRegularExpression,Qt.FindChildOptions).
  
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  re - regular expression
  
  options - search options
  
  Returns:
  
  found children
- findChildren
  
  @QtUninvokable public final <T extends QObject> QList<T> findChildren(Class<T> cl, QRegularExpression re, Qt.FindChildOptions options)
  
  This function overloads findChildren().
  
  Returns the children of this object that are instance of cl and that have names matching the regular expression re, or an empty list if there are no such objects. The search is performed recursively, unless options specifies the option FindDirectChildrenOnly.
  
  Type Parameters:
  
  T - type of children
  
  Parameters:
  
  cl - type of children
  
  re - regular expression
  
  options - search options
  
  Returns:
  
  found children
  
  See Also:
  
  findChildren()
- emit
  
  protected static void emit(QObject.PrivateSignal0 signal) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Parameters:
  
  signal - the signal to be emitted
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A> void emit(QObject.PrivateSignal1<A> signal, A arg1) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B> void emit(QObject.PrivateSignal2<A,B> signal, A arg1, B arg2) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C> void emit(QObject.PrivateSignal3<A,B,C> signal, A arg1, B arg2, C arg3) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C, D> void emit(QObject.PrivateSignal4<A,B,C,D> signal, A arg1, B arg2, C arg3, D arg4) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  arg4 - The argument for the fourth parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C, D, E> void emit(QObject.PrivateSignal5<A,B,C,D,E> signal, A arg1, B arg2, C arg3, D arg4, E arg5) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  arg4 - The argument for the fourth parameter of the signal.
  
  arg5 - The argument for the fifth parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C, D, E, F> void emit(QObject.PrivateSignal6<A,B,C,D,E,F> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  arg4 - The argument for the fourth parameter of the signal.
  
  arg5 - The argument for the fifth parameter of the signal.
  
  arg6 - The argument for the sixth parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C, D, E, F, G> void emit(QObject.PrivateSignal7<A,B,C,D,E,F,G> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  arg4 - The argument for the fourth parameter of the signal.
  
  arg5 - The argument for the fifth parameter of the signal.
  
  arg6 - The argument for the sixth parameter of the signal.
  
  arg7 - The argument for the seventh parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C, D, E, F, G, H> void emit(QObject.PrivateSignal8<A,B,C,D,E,F,G,H> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7, H arg8) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  arg4 - The argument for the fourth parameter of the signal.
  
  arg5 - The argument for the fifth parameter of the signal.
  
  arg6 - The argument for the sixth parameter of the signal.
  
  arg7 - The argument for the seventh parameter of the signal.
  
  arg8 - The argument for the eighth parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- emit
  
  protected static <A, B, C, D, E, F, G, H, I> void emit(QObject.PrivateSignal9<A,B,C,D,E,F,G,H,I> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7, H arg8, I arg9) throws QSignalAccessException
  
  Emits a private signal. This method may only be called from inside the signal owning object.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  I - The type of the ninth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be emitted
  
  arg1 - The argument for the first parameter of the signal.
  
  arg2 - The argument for the second parameter of the signal.
  
  arg3 - The argument for the third parameter of the signal.
  
  arg4 - The argument for the fourth parameter of the signal.
  
  arg5 - The argument for the fifth parameter of the signal.
  
  arg6 - The argument for the sixth parameter of the signal.
  
  arg7 - The argument for the seventh parameter of the signal.
  
  arg8 - The argument for the eighth parameter of the signal.
  
  arg9 - The argument for the ninth parameter of the signal.
  
  Throws:
  
  QSignalAccessException - if signal is emitted from outside the declaring class.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal1<?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<A,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F, G> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F, G> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F, G, H> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F, G> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F, G, H> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- connect
  
  public static <A, B, C, D, E, F, G, H, I> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Slot9<A,B,C,D,E,F,G,H,I> slot, Qt.ConnectionType... connectionType)
  
  Initializes a connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  I - The type of the ninth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be connected
  
  slot - the slot to be connected
  
  connectionType - type of connection
  
  Returns:
  
  connection if successful or null otherwise
  
  Throws:
  
  QMisfittingSignatureException - Raised if their signatures are incompatible.
  
  QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal1<?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal2<?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal2<A,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Slot4<A,B,C,D> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal, QMetaObject.Slot4<A,B,C,D> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Slot5<A,B,C,D,E> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F, G> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F, G> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F, G, H> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)
  
  Removes the connection between the given signal and slot.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<A> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal, QMetaObject.Slot2<A,B> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal, QMetaObject.Slot3<A,B,C> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal, QMetaObject.Slot4<A,B,C,D> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal, QMetaObject.Slot5<A,B,C,D,E> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal, QMetaObject.Slot6<A,B,C,D,E,F> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F, G> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal, QMetaObject.Slot7<A,B,C,D,E,F,G> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F, G, H> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal, QMetaObject.Slot8<A,B,C,D,E,F,G,H> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static <A, B, C, D, E, F, G, H, I> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Slot9<A,B,C,D,E,F,G,H,I> slot)
  
  Removes the connection between the given signal and slot.
  
  Type Parameters:
  
  A - The type of the first parameter of the signal.
  
  B - The type of the second parameter of the signal.
  
  C - The type of the third parameter of the signal.
  
  D - The type of the fourth parameter of the signal.
  
  E - The type of the fifth parameter of the signal.
  
  F - The type of the sixth parameter of the signal.
  
  G - The type of the seventh parameter of the signal.
  
  H - The type of the eighth parameter of the signal.
  
  I - The type of the ninth parameter of the signal.
  
  Parameters:
  
  signal - the signal to be disconnected
  
  slot - the slot to be disconnected
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- connect
  
  public static QMetaObject.Connection connect(QObject sender, String signal, QObject receiver, String slot, Qt.ConnectionType... connectionType)
  
  Creates a connection of the given type from the signal in the sender object to the method in the receiver object.
  
  Returns a handle to the connection that can be used to disconnect it later.
  
  QLabel label = new QLabel(); QScrollBar scrollBar = new QScrollBar(); QObject.connect(scrollBar, "valueChanged(int)", label, "setNum(int)");
  
  This example ensures that the label always displays the current scroll bar value. Note that the signal and slots parameters must not contain any variable names, only the type. E.g. the following would not work and throw QNoSuchSignalException/QNoSuchSlotException:
  
  QObject.connect(scrollBar, "valueChanged(int value)", label, "setNum(int value)");
  
  A signal can also be connected to another signal:
  
  public class MyWidget extends QWidget { public final Signal0 buttonClicked = new Signal0(); public MyWidget(){ myButton = new QPushButton(this); connect(myButton, "clicked()", this, "buttonClicked()"); } private QPushButton myButton; }
  
  or alternatively:
  
  clicked.connect(myButton.buttonClicked);
  
  In this example, the MyWidget constructor relays a signal from a private member variable, and makes it available under a name that relates to MyWidget.
  
  A signal can be connected to many slots and signals. Many signals can be connected to one slot.
  
  If a signal is connected to several slots, the slots are activated in the same order in which the connections were made, when the signal is emitted.
  
  In case the connection was successfully initialized the function returns a QMetaObject.Connection that represents a handle to this connection. The connection handle will be invalid if it cannot create the connection, for example, if QObject is unable to verify the existence of either signal or method, or if their signatures aren't compatible. In this case, the function returns null.
  
  By default, a signal is emitted for every connection you make; two signals are emitted for duplicate connections. You can break all of these connections with a single disconnect() call. If you pass the Qt.ConnectionType.UniqueConnection type, the connection will only be made if it is not a duplicate. If there is already a duplicate (exact same signal to the exact same slot on the same objects), the connection will fail and connect will return null.
  
  Note: Qt.ConnectionType.UniqueConnections do not work for lambdas; they only apply to connecting to member functions.
  
  The optional type parameter describes the type of connection to establish. In particular, it determines whether a particular signal is delivered to a slot immediately or queued for delivery at a later time. If the signal is queued, the parameters must be of types that are known to Qt's meta-object system, because Qt needs to copy the arguments to store them in an event behind the scenes. If you try to use a queued connection and get the error message
  
  QObject::connect: Cannot queue arguments of type 'MyType' (Make sure 'MyType' is registered using qRegisterMetaType().)
  
  call QMetaType#registerMetaType(Class) to register the data type before you establish the connection.
  
  See Also:
  
  disconnect(), sender(), QMetaType#registerMetaType(Class)
- connect
  
  public static QMetaObject.Connection connect(QObject sender, QMetaMethod signal, QObject receiver, QMetaMethod slot, Qt.ConnectionType... connectionType)
  
  Creates a connection of the given type from the signal in the sender object to the method in the receiver object. Returns a handle to the connection that can be used to disconnect it later.
  
  The Connection handle will be invalid if it cannot create the connection, for example, the parameters were invalid. You can check if a QMetaObject.Connection is returned.
  
  This function works in the same way as connect(QObject, String, QObject, String, io.qt.core.Qt.ConnectionType...) but it uses QMetaMethod to specify signal and method.
  
  See Also:
  
  connect(QObject, String, QObject, String, io.qt.core.Qt.ConnectionType...)
- disconnect
  
  public static boolean disconnect(QObject sender, String signal, QObject receiver, String slot)
  Disconnects signal in object sender from method in object receiver. Returns true if the connection is successfully broken; otherwise returns false.
  
  A signal-slot connection is removed when either of the objects involved are destroyed.
  
  disconnect() is typically used in three ways, as the following examples demonstrate.
  
  Disconnect everything connected to an object's signals:
  disconnect(myObject, null, null, null);
  equivalent to the non-static overloaded function
  myObject.disconnect();
  
  Disconnect everything connected to a specific signal:
  disconnect(myObject, "mySignal()", null, null);
  equivalent to the non-static overloaded function
  myObject.mySignal.disconnect();
  
  Disconnect a specific receiver:
  disconnect(myObject, null, myReceiver, null);
  equivalent to the non-static overloaded function
  myObject.disconnect(myReceiver);
  
  0 may be used as a wildcard, meaning "any signal", "any receiving object", or "any slot in the receiving object", respectively.
  
  The sender may never be 0. (You cannot disconnect signals from more than one object in a single call.)
  
  If signal is 0, it disconnects receiver and method from any signal. If not, only the specified signal is disconnected.
  
  If receiver is 0, it disconnects anything connected to signal. If not, QMetaObject.Slots in objects other than receiver are not disconnected.
  
  If method is 0, it disconnects anything that is connected to receiver. If not, only slots named method will be disconnected, and all other slots are left alone. The method must be 0 if receiver is left out, so you cannot disconnect a specifically-named slot on all objects.
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public static boolean disconnect(QObject sender, QMetaMethod signal, QObject receiver, QMetaMethod slot)
  Disconnects signal in object sender from method in object receiver receiver. Returns true if the connection is successfully broken; otherwise returns false.
  
  This function provides the same possibilities like disconnect(QObject, String, QObject, String) but uses QMetaMethod to represent the signal and the method to be disconnected.
  
  Additionally this function returns false and no signals and slots disconnected if:
  
  signal is not a member of sender class or one of its parent classes.
  
  method is not a member of receiver class or one of its parent classes.
  
  signal instance represents not a signal.
  
  null may be used as wildcard in the meaning "any signal" or "any slot in receiving object". In the same way 0 can be used for receiver in the meaning "any receiving object". In this case method should also be null. sender parameter should be never 0.
  Returns:
  
  true if successfully disconnected, or false otherwise.
  
  See Also:
  
  disconnect(QObject, String, QObject, String)
- disconnect
  
  public static boolean disconnect(QMetaObject.Connection connection)
  
  Disconnect a connection.
  
  If the connection is invalid or has already been disconnected, do nothing and return false.
  
  Parameters:
  
  connection - the connection
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public final boolean disconnect()
  
  Disconnect all connections originating in this object.
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- disconnect
  
  public final boolean disconnect(Object receiver)
  
  Disconnect all connections made from this signal emitter to a specific object.
  
  Parameters:
  
  receiver - The receiver to disconnect, or null to disconnect all receivers
  
  Returns:
  
  true if successfully disconnected, or false otherwise.
- metaObject
  
  @QtUninvokable public final QMetaObject metaObject()
  
  Returns a pointer to the meta-object of this object.
  
  Returns:
  
  the object's meta-object
- qt_metacast
  
  @QtUninvokable public final <T extends QtObjectInterface> T qt_metacast(Class<T> targetType)
  
  Casts an object to the given targetType. Returns null if object is not instance of targetType.
  
  Type Parameters:
  
  T - type
  
  Parameters:
  
  targetType -
  
  Returns:
  
  the object as targetType or null
- inherits
  
  @QtUninvokable public final boolean inherits(Class<?> targetType)
  
  Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false. A class is considered to inherit itself.
  
  Parameters:
  
  targetType -
  
  Returns:
  
  true if object instance of targetType
- receivers
  
  @QtUninvokable protected final int receivers(QMetaObject.AbstractSignal signalObject)
  
  See Also:
  
  receivers(String)
- toString
  
  public String toString()
  
  Overrides:
  
  toString in class Object

Class QObject