Module qtjambi

Package io.qt.core

Class QObject

java.lang.Object

io.qt.QtObject

io.qt.core.QObject

All Implemented Interfaces:

QtObjectInterface, QtSignalBlockerInterface, QtSignalEmitterInterface, QtThreadAffineInterface

Direct Known Subclasses:

IoDeviceBase, Q3DObject, Q3DScene, Q3DTheme, QAbstract3DAxis, QAbstract3DInputHandler, QAbstract3DSeries, QAbstractAnimation, QAbstractAnimation, QAbstractAspect, QAbstractAudioDeviceInfo, QAbstractAudioInput, QAbstractAudioOutput, QAbstractAxis, QAbstractDataProxy, QAbstractEventDispatcher, QAbstractItemDelegate, QAbstractItemModel, QAbstractItemModelTester, QAbstractMessageHandler, QAbstractNetworkCache, QAbstractOAuth, QAbstractOAuthReplyHandler, QAbstractSeries, QAbstractState, QAbstractTextDocumentLayout, QAbstractTransition, QAbstractUriResolver, QAbstractVideoFilter, QAbstractVideoSurface, QAccessibleBridgePlugin, QAccessiblePlugin, QAction, QActionGroup, QAnimationController, QAnimationDriver, QAnimationGroup, QAspectEngine, QAudioInput, QAudioOutput, QAudioProbe, QAudioSystemPlugin, QAxObject, QAxScript, QAxScriptManager, QBarModelMapper, QBarSet, QBluetoothDeviceDiscoveryAgent, QBluetoothLocalDevice, QBluetoothServer, QBluetoothServiceDiscoveryAgent, QBluetoothTransferManager, QBluetoothTransferReply, QBoxPlotModelMapper, QBoxSet, QButtonGroup, QCameraExposure, QCameraFocus, QCameraImageCapture, QCameraImageProcessing, QCanBus, QCanBusDevice, QCandlestickModelMapper, QCandlestickSet, QClipboard, QCompleter, QConnectionAbstractServer, QCoreApplication, QCustom3DItem, QDataWidgetMapper, QDBusAbstractAdaptor, QDBusAbstractInterfaceBase, QDBusPendingCallWatcher, QDBusServer, QDBusServiceWatcher, QDBusVirtualObject, QDesignerFormEditorInterface, QDesignerFormWindowToolInterface, QDesignerIntegrationInterface, QDesignerMetaDataBaseInterface, QDesignerWidgetDataBaseInterface, QDesignerWidgetFactoryInterface, QDnsLookup, QDrag, QDtls, QDtlsClientVerifier, QEventLoop, QExtensionManager, QFactoryLoader, QFileSelector, QFileSystemWatcher, QFutureWatcherBase, QGamepad, QGamepadKeyNavigation, QGamepadManager, QGenericPlugin, QGeoAreaMonitorSource, QGeoCodeReply, QGeoCodingManager, QGeoCodingManagerEngine, QGeoPositionInfoSource, QGeoRouteReply, QGeoRoutingManager, QGeoRoutingManagerEngine, QGeoSatelliteInfoSource, QGeoServiceProvider, QGesture, QGraphicsAnchor, QGraphicsApiFilter, QGraphicsEffect, QGraphicsItemAnimation, QGraphicsObject, QGraphicsScene, QGraphicsTransform, QHelpEngineCore, QHelpFilterEngine, QHelpSearchEngine, QHttpMultiPart, QIconEnginePlugin, QImageIOPlugin, QInAppProduct, QInAppStore, QInAppTransaction, QInputMethod, QIODevice, QItemSelectionModel, QJSEngine, QKeyEvent, QLayout, QLegendMarker, QLibrary, QLocalServer, QLowEnergyController, QLowEnergyService, QMacToolBar, QMacToolBarItem, QMaskGenerator, QMediaControl, QMediaObject, QMediaPlaylist, QMediaRecorder, QMediaService, QMediaServiceProviderPlugin, QMimeData, QModbusDevice, QModbusReply, QMorphTarget, QMouseEvent, QMovie, QNearFieldManager, QNearFieldShareManager, QNearFieldShareTarget, QNearFieldTarget, QNetworkAccessManager, QNetworkConfigurationManager, QNetworkCookieJar, QNetworkSession, QNode, QObjectCleanupHandler, QOffscreenSurface, QOpenGLContext, QOpenGLContextGroup, QOpenGLDebugLogger, QOpenGLShader, QOpenGLShaderProgram, QOpenGLTimeMonitor, QOpenGLTimerQuery, QOpenGLVertexArrayObject, QPdfWriter, QPickEvent, QPictureFormatPlugin, QPieModelMapper, QPieSlice, QPlaceManager, QPlaceManagerEngine, QPlaceReply, QPluginLoader, QQmlAspectEngine, QQmlComponent, QQmlContext, QQmlEngineExtensionPlugin, QQmlExpression, QQmlExtensionPlugin, QQmlFileSelector, QQmlNdefRecord, QQmlPropertyMap, QQuick3DObject, QQuickCloseEvent, QQuickImageResponse, QQuickItem, QQuickItemGrabResult, QQuickRenderControl, QQuickTextDocument, QQuickTextureFactory, QQuickTransform, QQuickWebEngineProfile, QQuickWebEngineScript, QRadioData, QRemoteObjectAbstractPersistedStore, QRemoteObjectNode, QRemoteObjectPendingCallWatcher, QRemoteObjectReplica, QRenderCapabilities, QRenderCaptureReply, QScreen, QScriptEngine, QScriptEngineDebugger, QScriptExtensionPlugin, QScroller, QScxmlDataModel, QScxmlInvokableService, QScxmlInvokableServiceFactory, QScxmlStateMachine, QSensor, QSensorBackend, QSensorGesture, QSensorGestureManager, QSensorGestureRecognizer, QSensorReading, QSessionManager, QSettings, QSGAbstractRenderer, QSGEngine, QSGTexture, QSGTextureProvider, QSharedMemory, QShortcut, QSignalMapper, QSignalSpy, QSocketNotifier, QSound, QSoundEffect, QSqlDriver, QSqlDriverPlugin, QStencilOperationArguments, QStencilTestArguments, QStyle, QStyleHints, QStylePlugin, QSvgRenderer, QSyntaxHighlighter, QSystemTrayIcon, QTcpServer, QTestEventLoop, QTextDocument, QTextObject, QTextToSpeech, QTextToSpeechEngine, QTextureWrapMode, QThread, QThreadPool, QTimeLine, QTimer, QTranslator, QUiLoader, QUndoGroup, QUndoStack, QValidator, QValue3DAxisFormatter, QVideoProbe, QVirtualKeyboardAbstractInputMethod, QVirtualKeyboardExtensionPlugin, QVirtualKeyboardInputContext, QVirtualKeyboardInputEngine, QVirtualKeyboardTrace, QWebChannel, QWebChannelAbstractTransport, QWebEngineCookieStore, QWebEngineDownloadItem, QWebEngineNotification, QWebEnginePage, QWebEngineProfile, QWebEngineUrlRequestInterceptor, QWebEngineUrlRequestJob, QWebEngineUrlSchemeHandler, QWebSocket, QWebSocketServer, QWheelEvent, QWidget, QWindow, QWinJumpList, QWinTaskbarButton, QWinTaskbarProgress, QWinThumbnailToolBar, QWinThumbnailToolButton, QXYModelMapper

public class QObject
extends QtObject
implements QtSignalEmitterInterface, QtSignalBlockerInterface, QtThreadAffineInterface

The base class of all Qt objects

Java wrapper for Qt's class QObject

Nested Class Summary

Nested Classes

Modifier and Type	Class	Description
class	QObject.MultiSignal	Wrapper class supporting the definition of overloaded signal in a class.
final class	QObject.PrivateSignal0	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes no parameters.
final class	QObject.PrivateSignal1<A>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes one parameter.
final class	QObject.PrivateSignal2<A,B>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters.
final class	QObject.PrivateSignal3<A,B,C>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters.
final class	QObject.PrivateSignal4<A,B,C,D>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters.
final class	QObject.PrivateSignal5<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters.
final class	QObject.PrivateSignal6<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters.
final class	QObject.PrivateSignal7<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters.
final class	QObject.PrivateSignal8<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters.
final class	QObject.PrivateSignal9<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters.
protected static final class	QObject.QDeclarativeConstructor	Parameter type for declarative constructors, i.e. constructors being called by QML only.
final class	QObject.Signal0	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes no parameters.
final class	QObject.Signal1<A>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes one parameter.
final class	QObject.Signal1Default1<A>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes one parameters and providing default value for the parameter.
final class	QObject.Signal2<A,B>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters.
final class	QObject.Signal2Default1<A,B>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters and providing a default value for parameter no. 2.
final class	QObject.Signal2Default2<A,B>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes two parameters and providing default values for parameters 1 and 2.
final class	QObject.Signal3<A,B,C>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters.
final class	QObject.Signal3Default1<A,B,C>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters and providing a default value for parameter no. 3.
final class	QObject.Signal3Default2<A,B,C>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters and providing default values for parameters 2 and 3.
final class	QObject.Signal3Default3<A,B,C>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes three parameters and providing default values for parameters 1 to 3.
final class	QObject.Signal4<A,B,C,D>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters.
final class	QObject.Signal4Default1<A,B,C,D>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing a default value for parameter no. 4.
final class	QObject.Signal4Default2<A,B,C,D>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing default values for parameters 3 and 4.
final class	QObject.Signal4Default3<A,B,C,D>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing default values for parameters 2 to 4.
final class	QObject.Signal4Default4<A,B,C,D>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes four parameters and providing default values for parameters 1 to 4.
final class	QObject.Signal5<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters.
final class	QObject.Signal5Default1<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing a default value for parameter no. 5.
final class	QObject.Signal5Default2<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 4 and 5.
final class	QObject.Signal5Default3<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 3 to 5.
final class	QObject.Signal5Default4<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 2 to 5.
final class	QObject.Signal5Default5<A,B,C,D,E>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes five parameters and providing default values for parameters 1 to 5.
final class	QObject.Signal6<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters.
final class	QObject.Signal6Default1<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing a default value for parameter no. 6.
final class	QObject.Signal6Default2<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 5 and 6.
final class	QObject.Signal6Default3<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 4 to 6.
final class	QObject.Signal6Default4<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 3 to 6.
final class	QObject.Signal6Default5<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 2 to 6.
final class	QObject.Signal6Default6<A,B,C,D,E,F>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes six parameters and providing default values for parameters 1 to 6.
final class	QObject.Signal7<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters.
final class	QObject.Signal7Default1<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing a default value for parameter no. 7.
final class	QObject.Signal7Default2<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 6 and 7.
final class	QObject.Signal7Default3<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 5 to 7.
final class	QObject.Signal7Default4<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 4 to 7.
final class	QObject.Signal7Default5<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 3 to 7.
final class	QObject.Signal7Default6<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 2 to 7.
final class	QObject.Signal7Default7<A,B,C,D,E,F,G>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes seven parameters and providing default values for parameters 1 to 7.
final class	QObject.Signal8<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters.
final class	QObject.Signal8Default1<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing a default value for parameter no. 8.
final class	QObject.Signal8Default2<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 7 and 8.
final class	QObject.Signal8Default3<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 6 to 8.
final class	QObject.Signal8Default4<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 5 to 8.
final class	QObject.Signal8Default5<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 4 to 8.
final class	QObject.Signal8Default6<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 3 to 8.
final class	QObject.Signal8Default7<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 2 to 8.
final class	QObject.Signal8Default8<A,B,C,D,E,F,G,H>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes eight parameters and providing default values for parameters 1 to 8.
final class	QObject.Signal9<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters.
final class	QObject.Signal9Default1<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing a default value for parameter no. 9.
final class	QObject.Signal9Default2<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 8 and 9.
final class	QObject.Signal9Default3<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 7 to 9.
final class	QObject.Signal9Default4<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 6 to 9.
final class	QObject.Signal9Default5<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 5 to 9.
final class	QObject.Signal9Default6<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 4 to 9.
final class	QObject.Signal9Default7<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 3 to 9.
final class	QObject.Signal9Default8<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 2 to 9.
final class	QObject.Signal9Default9<A,B,C,D,E,F,G,H,I>	Declare and instantiate a field of this class in your QObject subclass to declare a signal that takes nine parameters and providing default values for parameters 1 to 9.

Nested classes/interfaces inherited from class io.qt.QtObject

QtObject.QPrivateConstructor

Field Summary

Fields

Modifier and Type	Field	Description
final QObject.Signal1Default1<QObject>	destroyed	See QObject::destroyed(QObject*)
final QObject.PrivateSignal1<String>	objectNameChanged	See QObject::objectNameChanged(QString)
static final QMetaObject	staticMetaObject	This variable stores the meta-object for the class.

Constructor Summary

Constructors

Modifier	Constructor	Description
	QObject()	Overloaded constructor for QObject(io.qt.core.QObject) with parent = null.
	QObject(QObject parent)	See QObject::QObject(QObject*)
protected	QObject(QObject.QDeclarativeConstructor constructor)	Constructor for internal use only.
protected	QObject(QtObject.QPrivateConstructor p)	Constructor for internal use only.

Method Summary

Modifier and Type	Method	Description
final boolean	blockSignals(boolean b)	See QObject::blockSignals(bool)
protected void	childEvent(QChildEvent event)	See QObject::childEvent(QChildEvent*)
final QList<QObject>	children()	See QObject::children()const
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Connectable0 connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal1<?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Connectable1<? super A> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal2<?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal2<A,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Connectable2<? super A,? super B> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
final QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal, QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H, I> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H, I> QMetaObject.Connection	connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static QMetaObject.Connection	connect(QObject sender, QMetaMethod signal, QObject receiver, QMetaMethod slot, Qt.ConnectionType... connectionType)	Creates a connection of the given type from the signal in the sender object to the method in the receiver object.
static QMetaObject.Connection	connect(QObject sender, String signal, QObject receiver, String slot, Qt.ConnectionType... connectionType)	Creates a connection of the given type from the signal in the sender object to the method in the receiver object.
static QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable0 connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable1<? super A> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable2<? super A,? super B> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C, D> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C, D, E> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C, D, E, F, G> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C, D, E, F, G, H> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static <A, B, C, D, E, F, G, H, I> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and connectSignal.
static QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot0 slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot1<? super A> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot2<? super A,? super B> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot3<? super A,? super B,? super C> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
static <A, B, C, D, E, F, G, H, I> QMetaObject.Connection	connect(QObject.MultiSignal signal, QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot, Qt.ConnectionType... connectionType)	Initializes a connection between the given signal and slot.
protected void	connectNotify(QMetaMethod signal)	See QObject::connectNotify(QMetaMethod)
protected void	customEvent(QEvent event)	See QObject::customEvent(QEvent*)
final boolean	disconnect()	Disconnect all connections originating in this object.
static boolean	disconnect(QMetaObject.Connection connection)	Disconnect a connection.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal0 signal, QMetaObject.Connectable0 connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal1<?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal1<A> signal, QMetaObject.Connectable1<? super A> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal2<?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal2<A,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal2<A,B> signal, QMetaObject.Connectable2<? super A,? super B> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal, QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal, QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal, QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F> boolean	disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal, QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G> boolean	disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal, QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> boolean	disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal, QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal, QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H, I> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H, I> boolean	disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal, QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QObject sender, QMetaMethod signal, QObject receiver, QMetaMethod slot)	Disconnects signal in object sender from method in object receiver receiver.
static boolean	disconnect(QObject sender, String signal, QObject receiver, String slot)	Disconnects signal in object sender from method in object receiver.
static boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable0 connectSignal)	Removes the connection between the given signal and connectSignal.
static <A> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable1<? super A> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable2<? super A,? super B> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C, D> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C, D, E> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C, D, E, F> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C, D, E, F, G> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C, D, E, F, G, H> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal)	Removes the connection between the given signal and connectSignal.
static <A, B, C, D, E, F, G, H, I> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal)	Removes the connection between the given signal and connectSignal.
static boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot0 slot)	Removes the connection between the given signal and slot.
static <A> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot1<? super A> slot)	Removes the connection between the given signal and slot.
static <A, B> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot2<? super A,? super B> slot)	Removes the connection between the given signal and slot.
static <A, B, C> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot3<? super A,? super B,? super C> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot)	Removes the connection between the given signal and slot.
static <A, B, C, D, E, F, G, H, I> boolean	disconnect(QObject.MultiSignal signal, QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot)	Removes the connection between the given signal and slot.
final boolean	disconnect(Object receiver)	Disconnect all connections made from this signal emitter to a specific object.
protected void	disconnectNotify(QMetaMethod signal)	See QObject::disconnectNotify(QMetaMethod)
final void	disposeLater()	See QObject::deleteLater()
final void	dumpObjectInfo()	See QObject::dumpObjectInfo()const
final void	dumpObjectTree()	See QObject::dumpObjectTree()const
final QList<QByteArray>	dynamicPropertyNames()	See QObject::dynamicPropertyNames()const
protected static void	emit(QObject.PrivateSignal0 signal)	Emits a private signal.
protected static <A> void	emit(QObject.PrivateSignal1<A> signal, A arg1)	Emits a private signal.
protected static <A, B> void	emit(QObject.PrivateSignal2<A,B> signal, A arg1, B arg2)	Emits a private signal.
protected static <A, B, C> void	emit(QObject.PrivateSignal3<A,B,C> signal, A arg1, B arg2, C arg3)	Emits a private signal.
protected static <A, B, C, D> void	emit(QObject.PrivateSignal4<A,B,C,D> signal, A arg1, B arg2, C arg3, D arg4)	Emits a private signal.
protected static <A, B, C, D, E> void	emit(QObject.PrivateSignal5<A,B,C,D,E> signal, A arg1, B arg2, C arg3, D arg4, E arg5)	Emits a private signal.
protected static <A, B, C, D, E, F> void	emit(QObject.PrivateSignal6<A,B,C,D,E,F> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6)	Emits a private signal.
protected static <A, B, C, D, E, F, G> void	emit(QObject.PrivateSignal7<A,B,C,D,E,F,G> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7)	Emits a private signal.
protected static <A, B, C, D, E, F, G, H> void	emit(QObject.PrivateSignal8<A,B,C,D,E,F,G,H> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7, H arg8)	Emits a private signal.
protected static <A, B, C, D, E, F, G, H, I> void	emit(QObject.PrivateSignal9<A,B,C,D,E,F,G,H,I> signal, A arg1, B arg2, C arg3, D arg4, E arg5, F arg6, G arg7, H arg8, I arg9)	Emits a private signal.
boolean	event(QEvent event)	See QObject::event(QEvent*)
boolean	eventFilter(QObject watched, QEvent event)	See QObject::eventFilter(QObject*,QEvent*)
final QObject	findChild()	Overloaded function for findChild(java.lang.String, io.qt.core.Qt.FindChildOptions)
final QObject	findChild(String aName)	Overloaded function for findChild(java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).
final QObject	findChild(String aName, Qt.FindChildOption ... options)	Overloaded function for findChild(java.lang.String, io.qt.core.Qt.FindChildOptions).
final QObject	findChild(String aName, Qt.FindChildOptions options)	See QObject::findChild(QString,Qt::FindChildOptions)const
final <T extends QObject> T	findChild(Class<T> type)	Overloaded function for findChild(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions)
final <T extends QObject> T	findChild(Class<T> type, String aName)	Overloaded function for findChild(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).
final <T extends QObject> T	findChild(Class<T> type, String aName, Qt.FindChildOption ... options)	Overloaded function for findChild(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions).
final <T extends QObject> T	findChild(Class<T> type, String aName, Qt.FindChildOptions options)	See QObject::findChild(QString,Qt::FindChildOptions)const
final QList<QObject>	findChildren()	Overloaded function for findChildren(java.lang.String, io.qt.core.Qt.FindChildOptions)
final QList<QObject>	findChildren(QRegExp re)	Deprecated. Use findChildren(const QRegularExpression &, ...) instead.
final QList<QObject>	findChildren(QRegExp re, Qt.FindChildOption ... options)	Deprecated. Use findChildren(const QRegularExpression &, ...) instead.
final QList<QObject>	findChildren(QRegExp re, Qt.FindChildOptions options)	Deprecated. Use findChildren(const QRegularExpression &, ...) instead.
final QList<QObject>	findChildren(QRegularExpression re)	Overloaded function for findChildren(io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).
final QList<QObject>	findChildren(QRegularExpression re, Qt.FindChildOption ... options)	Overloaded function for findChildren(io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions).
final QList<QObject>	findChildren(QRegularExpression re, Qt.FindChildOptions options)	See QObject::findChildren(QRegularExpression,Qt::FindChildOptions)const
final QList<QObject>	findChildren(String aName)	Overloaded function for findChildren(java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).
final QList<QObject>	findChildren(String aName, Qt.FindChildOption ... options)	Overloaded function for findChildren(java.lang.String, io.qt.core.Qt.FindChildOptions).
final QList<QObject>	findChildren(String aName, Qt.FindChildOptions options)	See QObject::findChildren(QString,Qt::FindChildOptions)const
final <T extends QObject> QList<T>	findChildren(Class<T> type)	Overloaded function for findChildren(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions)
final <T extends QObject> QList<T>	findChildren(Class<T> type, QRegExp re)	Deprecated. Use findChildren(const QRegularExpression &, ...) instead.
final <T extends QObject> QList<T>	findChildren(Class<T> type, QRegExp re, Qt.FindChildOption ... options)	Deprecated. Use findChildren(const QRegularExpression &, ...) instead.
final <T extends QObject> QList<T>	findChildren(Class<T> type, QRegExp re, Qt.FindChildOptions options)	Deprecated. Use findChildren(const QRegularExpression &, ...) instead.
final <T extends QObject> QList<T>	findChildren(Class<T> type, QRegularExpression re)	Overloaded function for findChildren(java.lang.Class, io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).
final <T extends QObject> QList<T>	findChildren(Class<T> type, QRegularExpression re, Qt.FindChildOption ... options)	Overloaded function for findChildren(java.lang.Class, io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions).
final <T extends QObject> QList<T>	findChildren(Class<T> type, QRegularExpression re, Qt.FindChildOptions options)	See QObject::findChildren(QRegularExpression,Qt::FindChildOptions)const
final <T extends QObject> QList<T>	findChildren(Class<T> type, String aName)	Overloaded function for findChildren(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).
final <T extends QObject> QList<T>	findChildren(Class<T> type, String aName, Qt.FindChildOption ... options)	Overloaded function for findChildren(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions).
final <T extends QObject> QList<T>	findChildren(Class<T> type, String aName, Qt.FindChildOptions options)	See QObject::findChildren(QString,Qt::FindChildOptions)const
final String	getObjectName()	Kotlin property getter.
final boolean	inherits(String classname)	See QObject::inherits(const char*)const
final boolean	inherits(Class<?> targetType)	Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.
final void	installEventFilter(QObject filterObj)	See QObject::installEventFilter(QObject*)
protected final boolean	isSignalConnected(QMetaMethod signal)	See QObject::isSignalConnected(QMetaMethod)const
final boolean	isWidgetType()	See QObject::isWidgetType()const
final boolean	isWindowType()	See QObject::isWindowType()const
final void	killTimer(int id)	See QObject::killTimer(int)
final QMetaObject	metaObject()	Returns a pointer to the meta-object of this object.
final void	moveToThread(QThread thread)	See QObject::moveToThread(QThread*)
final String	objectName()	See QObject::objectName()const
final QObject	parent()	See QObject::parent()const
final Object	property(String name)	See QObject::property(const char*)const
static <T extends QtObjectInterface> T	qobject_cast(Class<T> targetType, QObject object)	See qobject_cast<T>(QObject *)
final <T extends QtObjectInterface> T	qt_metacast(Class<T> targetType)	Casts an object to the given targetType.
protected final int	receivers(String signal)	See QObject::receivers(const char*)const
protected final int	receivers(QMetaObject.AbstractSignal signalObject)
final void	removeEventFilter(QObject obj)	See QObject::removeEventFilter(QObject*)
protected final QObject	sender()	See QObject::sender()const
protected final int	senderSignalIndex()	See QObject::senderSignalIndex()const
final void	setObjectName(String name)	See QObject::setObjectName(QString)
final void	setParent(QObject parent)	See QObject::setParent(QObject*)
final boolean	setProperty(String name, Object value)	See QObject::setProperty(const char*,QVariant)
final boolean	signalsBlocked()	See QObject::signalsBlocked()const
final int	startTimer(int interval)	Overloaded function for startTimer(int, io.qt.core.Qt.TimerType) with timerType = io.qt.core.Qt.TimerType.CoarseTimer.
final int	startTimer(int interval, Qt.TimerType timerType)	See QObject::startTimer(int,Qt::TimerType)
final QThread	thread()	See QObject::thread()const
protected void	timerEvent(QTimerEvent event)	See QObject::timerEvent(QTimerEvent*)
String	toString()
static String	tr(String source)	Returns a translated version of source, or source itself if there is no appropriate translated version.
static String	tr(String source, String comment)	Returns a translated version of source, or source itself if there is no appropriate translated version.
static String	tr(String source, String comment, int count)	Returns a translated version of source, or source itself if there is no appropriate translated version.

Methods inherited from class io.qt.QtObject

dispose, equals, isDisposed

Methods inherited from class java.lang.Object

clone, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface io.qt.QtObjectInterface

dispose, isDisposed

Field Details

staticMetaObject

public static final QMetaObject staticMetaObject

This variable stores the meta-object for the class.

destroyed

public final QObject.Signal1Default1<QObject> destroyed

See QObject::destroyed(QObject*)

objectNameChanged

public final QObject.PrivateSignal1<String> objectNameChanged

See QObject::objectNameChanged(QString)

Constructor Details

QObject

public QObject()

Overloaded constructor for QObject(io.qt.core.QObject) with parent = null.

QObject

public QObject(QObject parent)

See QObject::QObject(QObject*)

QObject

protected QObject(QtObject.QPrivateConstructor p)

Constructor for internal use only.

Parameters:

p - expected to be null.

QObject

protected QObject(QObject.QDeclarativeConstructor constructor)

Constructor for internal use only. It is not allowed to call the declarative constructor from inside Java.

Method Details

blockSignals

@QtUninvokable
public final boolean blockSignals(boolean b)

See QObject::blockSignals(bool)

children

@QtUninvokable
public final QList<QObject> children()

See QObject::children()const

disposeLater

public final void disposeLater()

See QObject::deleteLater()

dumpObjectInfo

@QtUninvokable
public final void dumpObjectInfo()

See QObject::dumpObjectInfo()const

dumpObjectTree

@QtUninvokable
public final void dumpObjectTree()

See QObject::dumpObjectTree()const

dynamicPropertyNames

@QtUninvokable
public final QList<QByteArray> dynamicPropertyNames()

See QObject::dynamicPropertyNames()const

findChild

@QtUninvokable
public final <T extends QObject> T findChild(Class<T> type,
 String aName,
 Qt.FindChildOption ... options)

Overloaded function for findChild(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions).

findChild

@QtUninvokable
public final <T extends QObject> T findChild(Class<T> type,
 String aName)

Overloaded function for findChild(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChild

@QtUninvokable
public final <T extends QObject> T findChild(Class<T> type)

Overloaded function for findChild(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions)

with:

• aName = (String)null
• options = new io.qt.core.Qt.FindChildOptions(1)

findChild

@QtUninvokable
public final <T extends QObject> T findChild(Class<T> type,
 String aName,
 Qt.FindChildOptions options)

See QObject::findChild(QString,Qt::FindChildOptions)const

findChild

@QtUninvokable
public final QObject findChild(String aName,
 Qt.FindChildOption ... options)

Overloaded function for findChild(java.lang.String, io.qt.core.Qt.FindChildOptions).

findChild

@QtUninvokable
public final QObject findChild(String aName)

Overloaded function for findChild(java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChild

@QtUninvokable
public final QObject findChild()

Overloaded function for findChild(java.lang.String, io.qt.core.Qt.FindChildOptions)

with:

• aName = (String)null
• options = new io.qt.core.Qt.FindChildOptions(1)

findChild

@QtUninvokable
public final QObject findChild(String aName,
 Qt.FindChildOptions options)

See QObject::findChild(QString,Qt::FindChildOptions)const

findChildren

@Deprecated
@QtUninvokable
public final QList<QObject> findChildren(QRegExp re,
 Qt.FindChildOption ... options)

Deprecated.

Use findChildren(const QRegularExpression &, ...) instead.

Overloaded function for findChildren(io.qt.core.QRegExp, io.qt.core.Qt.FindChildOptions).

findChildren

@Deprecated
@QtUninvokable
public final QList<QObject> findChildren(QRegExp re)

Deprecated.

Use findChildren(const QRegularExpression &, ...) instead.

Overloaded function for findChildren(io.qt.core.QRegExp, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChildren

@Deprecated
@QtUninvokable
public final QList<QObject> findChildren(QRegExp re,
 Qt.FindChildOptions options)

Deprecated.

Use findChildren(const QRegularExpression &, ...) instead.

See QObject::findChildren(QRegExp,Qt::FindChildOptions)const

findChildren

@Deprecated
@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 QRegExp re,
 Qt.FindChildOption ... options)

Deprecated.

Use findChildren(const QRegularExpression &, ...) instead.

Overloaded function for findChildren(java.lang.Class, io.qt.core.QRegExp, io.qt.core.Qt.FindChildOptions).

findChildren

@Deprecated
@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 QRegExp re)

Deprecated.

Use findChildren(const QRegularExpression &, ...) instead.

Overloaded function for findChildren(java.lang.Class, io.qt.core.QRegExp, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChildren

@Deprecated
@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 QRegExp re,
 Qt.FindChildOptions options)

Deprecated.

Use findChildren(const QRegularExpression &, ...) instead.

See QObject::findChildren(QRegExp,Qt::FindChildOptions)const

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 QRegularExpression re,
 Qt.FindChildOption ... options)

Overloaded function for findChildren(java.lang.Class, io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions).

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 QRegularExpression re)

Overloaded function for findChildren(java.lang.Class, io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 QRegularExpression re,
 Qt.FindChildOptions options)

See QObject::findChildren(QRegularExpression,Qt::FindChildOptions)const

findChildren

@QtUninvokable
public final QList<QObject> findChildren(QRegularExpression re,
 Qt.FindChildOption ... options)

Overloaded function for findChildren(io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions).

findChildren

@QtUninvokable
public final QList<QObject> findChildren(QRegularExpression re)

Overloaded function for findChildren(io.qt.core.QRegularExpression, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChildren

@QtUninvokable
public final QList<QObject> findChildren(QRegularExpression re,
 Qt.FindChildOptions options)

See QObject::findChildren(QRegularExpression,Qt::FindChildOptions)const

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 String aName,
 Qt.FindChildOption ... options)

Overloaded function for findChildren(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions).

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 String aName)

Overloaded function for findChildren(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type)

Overloaded function for findChildren(java.lang.Class, java.lang.String, io.qt.core.Qt.FindChildOptions)

with:

• aName = (String)null
• options = new io.qt.core.Qt.FindChildOptions(1)

findChildren

@QtUninvokable
public final <T extends QObject> QList<T> findChildren(Class<T> type,
 String aName,
 Qt.FindChildOptions options)

See QObject::findChildren(QString,Qt::FindChildOptions)const

findChildren

@QtUninvokable
public final QList<QObject> findChildren(String aName,
 Qt.FindChildOption ... options)

Overloaded function for findChildren(java.lang.String, io.qt.core.Qt.FindChildOptions).

findChildren

@QtUninvokable
public final QList<QObject> findChildren(String aName)

Overloaded function for findChildren(java.lang.String, io.qt.core.Qt.FindChildOptions) with options = new io.qt.core.Qt.FindChildOptions(1).

findChildren

@QtUninvokable
public final QList<QObject> findChildren()

Overloaded function for findChildren(java.lang.String, io.qt.core.Qt.FindChildOptions)

with:

• aName = (String)null
• options = new io.qt.core.Qt.FindChildOptions(1)

findChildren

@QtUninvokable
public final QList<QObject> findChildren(String aName,
 Qt.FindChildOptions options)

See QObject::findChildren(QString,Qt::FindChildOptions)const

inherits

@QtUninvokable
public final boolean inherits(String classname)

See QObject::inherits(const char*)const

installEventFilter

@QtUninvokable
public final void installEventFilter(QObject filterObj)

See QObject::installEventFilter(QObject*)

isSignalConnected

@QtUninvokable
protected final boolean isSignalConnected(QMetaMethod signal)

See QObject::isSignalConnected(QMetaMethod)const

isWidgetType

@QtUninvokable
public final boolean isWidgetType()

See QObject::isWidgetType()const

isWindowType

@QtUninvokable
public final boolean isWindowType()

See QObject::isWindowType()const

killTimer

@QtUninvokable
public final void killTimer(int id)

See QObject::killTimer(int)

moveToThread

@QtUninvokable
public final void moveToThread(QThread thread)

See QObject::moveToThread(QThread*)

getObjectName

@QtUninvokable
public final String getObjectName()

Kotlin property getter. In Java use objectName() instead.

objectName

@QtUninvokable
public final String objectName()

See QObject::objectName()const

parent

@QtUninvokable
public final QObject parent()

See QObject::parent()const

property

@QtUninvokable
public final Object property(String name)

See QObject::property(const char*)const

receivers

@QtUninvokable
protected final int receivers(String signal)

See QObject::receivers(const char*)const

removeEventFilter

@QtUninvokable
public final void removeEventFilter(QObject obj)

See QObject::removeEventFilter(QObject*)

sender

@QtUninvokable
protected final QObject sender()

See QObject::sender()const

senderSignalIndex

@QtUninvokable
protected final int senderSignalIndex()

See QObject::senderSignalIndex()const

setObjectName

@QtUninvokable
public final void setObjectName(String name)

See QObject::setObjectName(QString)

setParent

@QtUninvokable
public final void setParent(QObject parent)

See QObject::setParent(QObject*)

setProperty

@QtUninvokable
public final boolean setProperty(String name,
 Object value)

See QObject::setProperty(const char*,QVariant)

signalsBlocked

@QtUninvokable
public final boolean signalsBlocked()

See QObject::signalsBlocked()const

Specified by:

signalsBlocked in interface QtSignalBlockerInterface

startTimer

@QtUninvokable
public final int startTimer(int interval)

Overloaded function for startTimer(int, io.qt.core.Qt.TimerType) with timerType = io.qt.core.Qt.TimerType.CoarseTimer.

startTimer

@QtUninvokable
public final int startTimer(int interval,
 Qt.TimerType timerType)

See QObject::startTimer(int,Qt::TimerType)

thread

@QtUninvokable
public final QThread thread()

See QObject::thread()const

Specified by:

thread in interface QtThreadAffineInterface

childEvent

@QtUninvokable
protected void childEvent(QChildEvent event)

See QObject::childEvent(QChildEvent*)

connectNotify

@QtUninvokable
protected void connectNotify(QMetaMethod signal)

See QObject::connectNotify(QMetaMethod)

customEvent

@QtUninvokable
protected void customEvent(QEvent event)

See QObject::customEvent(QEvent*)

disconnectNotify

@QtUninvokable
protected void disconnectNotify(QMetaMethod signal)

See QObject::disconnectNotify(QMetaMethod)

event

@QtUninvokable
public boolean event(QEvent event)

See QObject::event(QEvent*)

eventFilter

@QtUninvokable
public boolean eventFilter(QObject watched,
 QEvent event)

See QObject::eventFilter(QObject*,QEvent*)

timerEvent

@QtUninvokable
protected void timerEvent(QTimerEvent event)

See QObject::timerEvent(QTimerEvent*)

tr

public static String tr(String source)

Returns a translated version of source, or source itself if there is no appropriate translated version. Note that if you need to translate in a static context, you can use QCoreApplication::translate(), which is a static method.

Parameters:

source - the source text to translate.

Returns:

translated version of the source text.

See Also:

• QObject::tr(const char *, const char *, int)

tr

public static String tr(String source,
 String comment)

Returns a translated version of source, or source itself if there is no appropriate translated version. The comment is used to help translators translate the source text. Note that if you need to translate in a static context, you can use QCoreApplication::translate(), which is a static method.

Parameters:

source - the source text to translate.

comment - helps the translator translate the source text.

Returns:

translated version of the source text.

See Also:

• QObject::tr(const char *, const char *, int)

tr

public static String tr(String source,
 String comment,
 int count)

Returns a translated version of source, or source itself if there is no appropriate translated version. If %n occurs in the source text, it will be substituted with count. The comment is used to help translators translate the source text. Note that if you need to translate in a static context, you can use QCoreApplication::translate(), which is a static method.

Parameters:

source - the source text to translate.

comment - helps the translator translate the source text.

count - in source %n will be substituted by count.

Returns:

translated version of the source text.

See Also:

• QObject::tr(const char *, const char *, int)

emit

protected static void emit(QObject.PrivateSignal0 signal)
                    throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Parameters:

signal - the signal to be emitted

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A> void emit(QObject.PrivateSignal1<A> signal,
 A arg1)
                        throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B> void emit(QObject.PrivateSignal2<A,B> signal,
 A arg1,
 B arg2)
                          throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C> void emit(QObject.PrivateSignal3<A,B,C> signal,
 A arg1,
 B arg2,
 C arg3)
                            throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C,
D> void emit(QObject.PrivateSignal4<A,B,C,D> signal,
 A arg1,
 B arg2,
 C arg3,
 D arg4)
                              throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

arg4 - The argument for the fourth parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C,
D,
E> void emit(QObject.PrivateSignal5<A,B,C,D,E> signal,
 A arg1,
 B arg2,
 C arg3,
 D arg4,
 E arg5)
                                throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

arg4 - The argument for the fourth parameter of the signal.

arg5 - The argument for the fifth parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C,
D,
E,
F> void emit(QObject.PrivateSignal6<A,B,C,D,E,F> signal,
 A arg1,
 B arg2,
 C arg3,
 D arg4,
 E arg5,
 F arg6)
                                  throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

arg4 - The argument for the fourth parameter of the signal.

arg5 - The argument for the fifth parameter of the signal.

arg6 - The argument for the sixth parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C,
D,
E,
F,
G> void emit(QObject.PrivateSignal7<A,B,C,D,E,F,G> signal,
 A arg1,
 B arg2,
 C arg3,
 D arg4,
 E arg5,
 F arg6,
 G arg7)
                                    throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

arg4 - The argument for the fourth parameter of the signal.

arg5 - The argument for the fifth parameter of the signal.

arg6 - The argument for the sixth parameter of the signal.

arg7 - The argument for the seventh parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C,
D,
E,
F,
G,
H> void emit(QObject.PrivateSignal8<A,B,C,D,E,F,G,H> signal,
 A arg1,
 B arg2,
 C arg3,
 D arg4,
 E arg5,
 F arg6,
 G arg7,
 H arg8)
                                      throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

arg4 - The argument for the fourth parameter of the signal.

arg5 - The argument for the fifth parameter of the signal.

arg6 - The argument for the sixth parameter of the signal.

arg7 - The argument for the seventh parameter of the signal.

arg8 - The argument for the eighth parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

emit

protected static <A,
B,
C,
D,
E,
F,
G,
H,
I> void emit(QObject.PrivateSignal9<A,B,C,D,E,F,G,H,I> signal,
 A arg1,
 B arg2,
 C arg3,
 D arg4,
 E arg5,
 F arg6,
 G arg7,
 H arg8,
 I arg9)
                                        throws QSignalAccessException

Emits a private signal. This method may only be called from inside the signal owning object.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be emitted

arg1 - The argument for the first parameter of the signal.

arg2 - The argument for the second parameter of the signal.

arg3 - The argument for the third parameter of the signal.

arg4 - The argument for the fourth parameter of the signal.

arg5 - The argument for the fifth parameter of the signal.

arg6 - The argument for the sixth parameter of the signal.

arg7 - The argument for the seventh parameter of the signal.

arg8 - The argument for the eighth parameter of the signal.

arg9 - The argument for the ninth parameter of the signal.

Throws:

QSignalAccessException - if signal is emitted from outside the declaring class.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal0 signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal1<?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal1<A> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<A,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<A,B> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F,
G>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F,
G>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal,
 QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F,
G>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal,
 QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal,
 QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal0 signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal1<?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal1<A> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal2<?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal2<A,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal2<A,B> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal3<?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,B,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal4<?,?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal5<?,?,?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal6<?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal7<?,?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,?,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,?,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,?,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,?,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,?,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,?> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal8<?,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,?,?,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,?,?,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,?,?,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,?,?,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,?,?> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,?> signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal,
 QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal9<?,?,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,?,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,?,?,?,?,?,?,?> signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,?,?,?,?,?,?> signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,?,?,?,?,?> signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,?,?,?,?> signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,?,?,?> signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,?,?> signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,?> signal,
 QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal,
 QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public final QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal0 signal,
 QMetaObject.Connectable0 connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static boolean disconnect(QMetaObject.AbstractPrivateSignal0 signal,
 QMetaObject.Connectable0 connectSignal)

Removes the connection between the given signal and connectSignal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal1<A> signal,
 QMetaObject.Connectable1<? super A> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A> boolean disconnect(QMetaObject.AbstractPrivateSignal1<A> signal,
 QMetaObject.Connectable1<? super A> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal2<A,B> signal,
 QMetaObject.Connectable2<? super A,? super B> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B> boolean disconnect(QMetaObject.AbstractPrivateSignal2<A,B> signal,
 QMetaObject.Connectable2<? super A,? super B> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal,
 QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C> boolean disconnect(QMetaObject.AbstractPrivateSignal3<A,B,C> signal,
 QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal,
 QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QMetaObject.AbstractPrivateSignal4<A,B,C,D> signal,
 QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal,
 QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QMetaObject.AbstractPrivateSignal5<A,B,C,D,E> signal,
 QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal,
 QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QMetaObject.AbstractPrivateSignal6<A,B,C,D,E,F> signal,
 QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C,
D,
E,
F,
G>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal,
 QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C,
D,
E,
F,
G> boolean disconnect(QMetaObject.AbstractPrivateSignal7<A,B,C,D,E,F,G> signal,
 QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal,
 QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H> boolean disconnect(QMetaObject.AbstractPrivateSignal8<A,B,C,D,E,F,G,H> signal,
 QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I>
QMetaObject.Connection connect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal,
 QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I> boolean disconnect(QMetaObject.AbstractPrivateSignal9<A,B,C,D,E,F,G,H,I> signal,
 QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot0 slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot1<? super A> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot2<? super A,? super B> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F,
G>
QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H>
QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I>
QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be connected

slot - the slot to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QUninvokableSlotException - Raised if slot is annotated @QtUninvokable.

QMisfittingSignatureException - Raised if slot does not match to any of the signatures.

connect

public static QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable0 connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable1<? super A> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable2<? super A,? super B> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C,
D> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F> QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F,
G>
QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H>
QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

connect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I>
QMetaObject.Connection connect(QObject.MultiSignal signal,
 QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal,
 Qt.ConnectionType... connectionType)

Initializes a connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be connected

connectSignal - the signal to be connected

connectionType - type of connection

Returns:

connection if successful or null otherwise

Throws:

QMisfittingSignatureException - Raised if their signatures are incompatible.

QMisfittingSignatureException - Raised if connectSignal does not match to any of the signatures.

disconnect

public static boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot0 slot)

Removes the connection between the given signal and slot.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot1<? super A> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot2<? super A,? super B> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot3<? super A,? super B,? super C> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot4<? super A,? super B,? super C,? super D> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot5<? super A,? super B,? super C,? super D,? super E> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot6<? super A,? super B,? super C,? super D,? super E,? super F> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Slot9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> slot)

Removes the connection between the given signal and slot.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be disconnected

slot - the slot to be disconnected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable0 connectSignal)

Removes the connection between the given signal and connectSignal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable1<? super A> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable2<? super A,? super B> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable3<? super A,? super B,? super C> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable4<? super A,? super B,? super C,? super D> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable5<? super A,? super B,? super C,? super D,? super E> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable6<? super A,? super B,? super C,? super D,? super E,? super F> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable7<? super A,? super B,? super C,? super D,? super E,? super F,? super G> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable8<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static <A,
B,
C,
D,
E,
F,
G,
H,
I> boolean disconnect(QObject.MultiSignal signal,
 QMetaObject.Connectable9<? super A,? super B,? super C,? super D,? super E,? super F,? super G,? super H,? super I> connectSignal)

Removes the connection between the given signal and connectSignal.

Type Parameters:

A - The type of the first parameter of the signal.

B - The type of the second parameter of the signal.

C - The type of the third parameter of the signal.

D - The type of the fourth parameter of the signal.

E - The type of the fifth parameter of the signal.

F - The type of the sixth parameter of the signal.

G - The type of the seventh parameter of the signal.

H - The type of the eighth parameter of the signal.

I - The type of the ninth parameter of the signal.

Parameters:

signal - the signal to be disconnected

connectSignal - the signal to be connected

Returns:

true if successfully disconnected, or false otherwise.

connect

public static QMetaObject.Connection connect(QObject sender,
 String signal,
 QObject receiver,
 String slot,
 Qt.ConnectionType... connectionType)

Creates a connection of the given type from the signal in the sender object to the method in the receiver object.

Returns a handle to the connection that can be used to disconnect it later.

QLabel label = new QLabel();
QScrollBar scrollBar = new QScrollBar();
QObject.connect(scrollBar, "valueChanged(int)", label, "setNum(int)");


This example ensures that the label always displays the current scroll bar value. Note that the signal and slots parameters must not contain any variable names, only the type. E.g. the following would not work and throw QNoSuchSignalException/QNoSuchSlotException:

QObject.connect(scrollBar, "valueChanged(int value)", label, "setNum(int value)");

A signal can also be connected to another signal:

public class MyWidget extends QWidget {
public final Signal0 buttonClicked = new Signal0();

public MyWidget(){
myButton = new QPushButton(this);
connect(myButton, "clicked()", this, "buttonClicked()");
}

private QPushButton myButton;
}

or alternatively:

clicked.connect(myButton.buttonClicked);

In this example, the MyWidget constructor relays a signal from a private member variable, and makes it available under a name that relates to MyWidget.

A signal can be connected to many slots and signals. Many signals can be connected to one slot.

If a signal is connected to several slots, the slots are activated in the same order in which the connections were made, when the signal is emitted.

In case the connection was successfully initialized the function returns a QMetaObject.Connection that represents a handle to this connection. The connection handle will be invalid if it cannot create the connection, for example, if QObject is unable to verify the existence of either signal or method, or if their signatures aren't compatible. In this case, the function returns null.

By default, a signal is emitted for every connection you make; two signals are emitted for duplicate connections. You can break all of these connections with a single disconnect() call. If you pass the Qt.ConnectionType.UniqueConnection type, the connection will only be made if it is not a duplicate. If there is already a duplicate (exact same signal to the exact same slot on the same objects), the connection will fail and connect will return null.

Note: Qt.ConnectionType.UniqueConnections do not work for lambdas; they only apply to connecting to member functions.

The optional type parameter describes the type of connection to establish. In particular, it determines whether a particular signal is delivered to a slot immediately or queued for delivery at a later time. If the signal is queued, the parameters must be of types that are known to Qt's meta-object system, because Qt needs to copy the arguments to store them in an event behind the scenes. If you try to use a queued connection and get the error message

QObject::connect: Cannot queue arguments of type 'MyType' (Make sure 'MyType' is registered using qRegisterMetaType().)

call

invalid @link

QMetaType#registerMetaType(Class)

to register the data type before you establish the connection.

See Also:

• disconnect()
• sender()
• invalid @see

  QMetaType#registerMetaType(Class)

connect

public static QMetaObject.Connection connect(QObject sender,
 QMetaMethod signal,
 QObject receiver,
 QMetaMethod slot,
 Qt.ConnectionType... connectionType)

Creates a connection of the given type from the signal in the sender object to the method in the receiver object. Returns a handle to the connection that can be used to disconnect it later.

The Connection handle will be invalid if it cannot create the connection, for example, the parameters were invalid. You can check QMetaObject.Connection.isConnected() on the returned connection object.

This function works in the same way as connect(QObject, String, QObject, String, Qt.ConnectionType...) but it uses QMetaMethod to specify signal and method.

See Also:

• connect(QObject, String, QObject, String, Qt.ConnectionType...)

disconnect

public static boolean disconnect(QObject sender,
 String signal,
 QObject receiver,
 String slot)

Disconnects signal in object sender from method in object receiver. Returns true if the connection is successfully broken; otherwise returns false.

A signal-slot connection is removed when either of the objects involved are destroyed.

disconnect() is typically used in three ways, as the following examples demonstrate.

1. Disconnect everything connected to an object's signals:

   disconnect(myObject, null, null, null);

   equivalent to the non-static overloaded function

   myObject.disconnect();

2. Disconnect everything connected to a specific signal:

   disconnect(myObject, "mySignal()", null, null);

   equivalent to the non-static overloaded function

   myObject.mySignal.disconnect();

3. Disconnect a specific receiver:

   disconnect(myObject, null, myReceiver, null);

   equivalent to the non-static overloaded function

   myObject.disconnect(myReceiver);

0 may be used as a wildcard, meaning "any signal", "any receiving object", or "any slot in the receiving object", respectively.

The sender may never be 0. (You cannot disconnect signals from more than one object in a single call.)

If signal is 0, it disconnects receiver and method from any signal. If not, only the specified signal is disconnected.

If receiver is 0, it disconnects anything connected to signal. If not, QMetaObject.@StrictNonNull Slots in objects other than receiver are not disconnected.

If method is 0, it disconnects anything that is connected to receiver. If not, only slots named method will be disconnected, and all other slots are left alone. The method must be 0 if receiver is left out, so you cannot disconnect a specifically-named slot on all objects.

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public static boolean disconnect(QObject sender,
 QMetaMethod signal,
 QObject receiver,
 QMetaMethod slot)

Disconnects signal in object sender from method in object receiver receiver. Returns true if the connection is successfully broken; otherwise returns false.

This function provides the same possibilities like disconnect(QObject, String, QObject, String) but uses QMetaMethod to represent the signal and the method to be disconnected.

Additionally this function returns false and no signals and slots disconnected if:

1. signal is not a member of sender class or one of its parent classes.
2. method is not a member of receiver class or one of its parent classes.
3. signal instance represents not a signal.

null may be used as wildcard in the meaning "any signal" or "any slot in receiving object". In the same way 0 can be used for receiver in the meaning "any receiving object". In this case method should also be null. sender parameter should be never 0.

Returns:

true if successfully disconnected, or false otherwise.

See Also:

• disconnect(QObject, String, QObject, String)

disconnect

public static boolean disconnect(QMetaObject.Connection connection)

Disconnect a connection.

If the connection is invalid or has already been disconnected, do nothing and return false.

Parameters:

connection - the connection

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public final boolean disconnect()

Disconnect all connections originating in this object.

Returns:

true if successfully disconnected, or false otherwise.

disconnect

public final boolean disconnect(Object receiver)

Disconnect all connections made from this signal emitter to a specific object.

Parameters:

receiver - The receiver to disconnect, or null to disconnect all receivers

Returns:

true if successfully disconnected, or false otherwise.

metaObject

@QtUninvokable
public final QMetaObject metaObject()

Returns a pointer to the meta-object of this object.

Returns:

the object's meta-object

qt_metacast

@QtUninvokable
public final <T extends QtObjectInterface> T qt_metacast(Class<T> targetType)

Casts an object to the given targetType. Returns null if object is not instance of targetType.

Type Parameters:

T - type

Parameters:

targetType -

Returns:

the object as targetType or null

inherits

@QtUninvokable
public final boolean inherits(Class<?> targetType)

Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false. A class is considered to inherit itself.

Parameters:

targetType -

Returns:

true if object instance of targetType

receivers

@QtUninvokable
protected final int receivers(QMetaObject.AbstractSignal signalObject)

See Also:

• receivers(String)

qobject_cast

@QtUninvokable
public static <T extends QtObjectInterface> T qobject_cast(Class<T> targetType,
 QObject object)

See qobject_cast<T>(QObject *)

toString

@QtUninvokable
public String toString()

Overrides:

toString in class Object